HN-302
formula
Component dosage /g component dosage /g
A, E-51 epoxy resin 100 aluminum oxide (300 mesh) 50
Nitrile rubber -40 4 B, diethylenetriamine 12.5
Tricresyl Phosphate 15 A: B=100:7.4
Preparation and solidification Weigh in order, mix well, and cure at 25～30°C for 48h, or 80～90°C for 2～3h.
Use The glue is used for bonding metal, rubber, plastics, wood, etc. It can be cured at room temperature and is easy to use. The B component is strong and stimulates odor.
E-4 glue
formula
Component dosage /g component dosage /g
A, E-44 epoxy resin 4.7 polyvinyl alcohol acetaldehyde 12.6
Zinc phenolic resin 15.7 B, 2-ethyl-4-methylimidazole 1
Solvent (ethyl acetate: absolute ethanol = 7:3) 67 A: B=100:1
Preparation and curing: Proportional weighing, mixing, bonding pressure 0.05 ~ 0.1MPa, curing at 80 °C under 1h, 130 °C under 4h.
Use The glue is used to glue aluminum and steel to off-work steel and to glue the grinding wheel. The metal structural adhesive used at 150°C is excellent in heat resistance and can withstand 250°C in the short term.
AFG-80 Adhesive
formula
AFG-80 amino tetrafunctional epoxy resin 100 647 # anhydride 80
Liquid Butyronitrile 10 2-Ethyl-4-methylimidazole 2
Preparation and solidification Weigh in order and mix well. The bonding pressure was 0.05 MPa and the curing was 150 hours and 3 hours.
Use The glue is used for the bonding of metal, glass, porcelain, fiberglass and other materials.
KH-51 epoxy adhesive
formula
Component dosage /g component dosage /g
E-51 epoxy resin 100 phenylenediamine 14
Liquid nitrile rubber -40 18 to 20 2-ethyl-4-methyl imidazole 4
Preparation and curing According to the amount of weighing in order, can be evenly mixed. Curing for 3 h at 120°C.
Uses The adhesive has good comprehensive properties such as adhesive properties and media resistance and is used for bonding of aluminum alloy, steel, copper or glass fiber reinforced materials.
KH-225 glue
formula
Component dosage /g component dosage /g
E-51 epoxy resin 100 2-ethyl-4-methylimidazole 10
Carboxylated Butyronitrile-21 35
Preparation and solidification Weigh in order and evenly mix. Curing is 804-8 hours, or 3 hours at 120°C.
Use The glue is used to bond metal, glass steel, hard plastic, ceramics, glass, jade and so on. Suitable for bonding complex shaped parts.
MS-3 adhesive
formula
Component dosage /g component dosage /g
E-51 epoxy resin 100 phenyl dibutylurea 16
Liquid nitrile rubber-40 20 Fumed silica2
Dicyandiamide 10
Preparation and curing First of all, the liquid in the recipe is heated and mixed, and then the solid part is mixed and mixed evenly. Stir and reuse before use. Curing for 8 hours at 90°C. Or 100 °C 6h. Or 130 °C 2h.
Use The glue is used for non-metallic bonding of aluminum, steel, copper and other metals, ceramics, glass, bakelite, etc. It can also be used for sealing. Adhesion performance is excellent, toxicity is low, curing temperature is not high. It can also be used at 100 °C.
65-01 glue
formula
Component dosage /g component dosage /g
E-51 Epoxy Resin 100 Alumina Powder (300 mesh) 50
Butyronitrile-40 4 Phenylenediamine 15
Tricresyl Phosphate 15
Preparation and curing Firstly, the two components A and B are weighed according to the dosage. When used, the two components A and B are mixed and mixed evenly. Adhesive pressure 0.03 ~ 0.07MPa; curing at room temperature 1d, 150 °C under 2h. Applicable to 50g, 6h at 25°C.
Use The glue has a high bonding strength, water resistance, seawater, fuel oil, transformer oil. Can be used in -55 ~ 150 °C. Mainly used for bonding metal, rubber, plastics, glass, ceramics, cement, stone, wood and other materials. It is especially suitable for bonding of metal and rubber and bonding by rubber vulcanization.
250 epoxy adhesive
formula
Component dosage /g component dosage /g
Bisphenol S epoxy resin 100 Liquid nitrile rubber 10
E-51 Epoxy Resin 100 20# Polyamide 200
D-17 epoxy resin 20 acetone, butanone amount
Preparation and curing First, mix and weigh according to the amount, then add 200# polyamide and mix well. The bonding pressure was 0.05 MPa, and the curing conditions were 5 hours at 50°C or 2 to 3 hours at 100°C.
Use The glue is used to glue aluminum alloy, copper, iron and non-metal materials.
