Select Language
Name:PVC resin
Appearance: White powder
CAS NO:9002-86-2
Molecular Formula:(C2H3CL)n
PVC resin is the most widely raw material used in plastic production. It has good chemical stability corrosion resistance and water resistance. It can be dissolved in acetone , hydrochloric ether, ester and some alcohol . It can offer good solubility , good electrical insulation , thermoplasticity and membrane forming capacity.
The PVC Resins are polymerized by suspension process, their appearance being in white powder form. They are essential materials for preparing PVC compounds. By adding blending agents and employing different techniques, they can be made into rigid or non-rigid PVC products and are suppliable in a wide range of transparent, translucent, and opaque colours.
Our PVC Resins are distinguished for their insulating, moisture-proof, oil-resistant, acid-resistant, and alkali-resitant properties.
2.Specifications:
Tape: |
SG1 |
SG2 |
SG3 |
SG4 |
SG5 |
SG6 |
SG7 |
SG8 |
K value |
77-75 |
74-73 |
72-71 |
70-69 |
68-66 |
65-63 |
62-60 |
59-55 |
Viscosity, ml/g |
156-144 |
143-136 |
135-127 |
126-119 |
118-107 |
106-96 |
95-87 |
86-73 |
Average polymerization |
|
|
1350-1250 |
1250-1150 |
1100-1000 |
950-850 |
950-850 |
750-650 |
Number of impurity particle max |
30 |
30 |
30 |
30 |
30 |
30 |
40 |
40 |
Volatiles content % max |
0.40 |
0.40 |
0.40 |
0.40 |
0.40 |
0.40 |
0.40 |
0.40 |
Appearing density g/ml min |
0.42 |
0.42 |
0.42 |
0.42 |
0.42 |
0.45 |
0.45 |
0.45 |
Residual after sieve 0.25mm mesh max |
2.0 |
2.0 |
2.0 |
2.0 |
2.0 |
2.0 |
2.0 |
2.0 |
0.063mm min |
90 |
90 |
90 |
90 |
90 |
90 |
90 |
90 |
Number of grain/400cm2 max |
40 |
40 |
40 |
40 |
40 |
40 |
40 |
40 |
Plasticizer absorbency value of 100g resin |
25 |
25 |
25 |
22 |
19 |
16 |
14 |
14 |
Whiteness % min |
74 |
74 |
74 |
74 |
74 |
74 |
70 |
70 |
Residual chlorethylenecontent mg/kg max |
5 |
5 |
5 |
5 |
5 |
5 |
5 |
5 |
Ethylidene chloride mg/kg max |
150 |
150 |
150 |
150 |
150 |
150 |
150 |
150 |
3.Package:
25kg/bag, PP valve bag with PE liner.
4.Application:
PVC resin - SG3 K-Value 72-71, Average degree of polymerization 1350-1250
PVC resin - SG4 K-Value 70-69, Average degree of polymerization 1250-1150
PVC resin - SG5 K-Value 68-66, Average degree of polymerization 1100-1000
PVC resin - SG6 K-Value 65-63, Average degree of polymerization 950-850
PVC resin - SG7 K-Value 62-60, Average degree of polymerization 850-750
PVC resin - SG8 K-Value 59-55, Average degree of polymerization 750-650
SG-1 is used in producing high-grade electrical insulating material
SG-2 is used in producing electrical insulating material, common soft products and film
SG-3 is used in producing electrical insulating materials, agricultural film, daily-use plastic products,
SG-4 is used in producing membranelle for industrial and civil use, tube and pipes
SG-5 is used in producing transparent products section bar, hard tube and decorative materials
SG-6 is used in producing clear foil, hard board and welding rod
SG-7, SG-8 is used in producing clear foil, hard injection molding.
5. FAQ
1)Q:Are you a factory or trading company?
A:We are a factory.
2)Q:Where is your factory located? How can I visit there?
A:Our factory is located in Zhengzhou, Henan Province, China
you can fly to Zhengzhou Xinzheng International Airport .
All our clients, from home or abroad, are warmly welcome to visit us!
3)Q:What is thepayment terms?
A: L/C ,T/T, D/P, D/A
4)Q:How can I get some samples?
A: Kindly send us your address, we are honored to offer you samples.
5)Q:How does your factory do regarding quality control?
A: Our factory can accept any third party inspecition.
Contact Person: Doris
Hot Sale! PVC Compound / Virgin and Recycled PVC Resin
Name:PVC resin
Appearance: White powder
CAS NO:9002-86-2
Molecular Formula:(C2H3CL)n
PVC resin is the most widely raw material used in plastic production. It has good chemical stability corrosion resistance and water resistance. It can be dissolved in acetone , hydrochloric ether, ester and some alcohol . It can offer good solubility , good electrical insulation , thermoplasticity and membrane forming capacity.
The PVC Resins are polymerized by suspension process, their appearance being in white powder form. They are essential materials for preparing PVC compounds. By adding blending agents and employing different techniques, they can be made into rigid or non-rigid PVC products and are suppliable in a wide range of transparent, translucent, and opaque colours.
Our PVC Resins are distinguished for their insulating, moisture-proof, oil-resistant, acid-resistant, and alkali-resitant properties.
2.Specifications:
Tape: |
SG1 |
SG2 |
SG3 |
SG4 |
SG5 |
SG6 |
SG7 |
SG8 |
K value |
77-75 |
74-73 |
72-71 |
70-69 |
68-66 |
65-63 |
62-60 |
59-55 |
Viscosity, ml/g |
156-144 |
143-136 |
135-127 |
126-119 |
118-107 |
106-96 |
95-87 |
86-73 |
Average polymerization |
|
|
1350-1250 |
1250-1150 |
1100-1000 |
950-850 |
950-850 |
750-650 |
Number of impurity particle max |
30 |
30 |
30 |
30 |
30 |
30 |
40 |
40 |
Volatiles content % max |
0.40 |
0.40 |
0.40 |
0.40 |
0.40 |
0.40 |
0.40 |
0.40 |
Appearing density g/ml min |
0.42 |
0.42 |
0.42 |
0.42 |
0.42 |
0.45 |
0.45 |
0.45 |
Residual after sieve 0.25mm mesh max |
2.0 |
2.0 |
2.0 |
2.0 |
2.0 |
2.0 |
2.0 |
2.0 |
0.063mm min |
90 |
90 |
90 |
90 |
90 |
90 |
90 |
90 |
Number of grain/400cm2 max |
40 |
40 |
40 |
40 |
40 |
40 |
40 |
40 |
Plasticizer absorbency value of 100g resin |
25 |
25 |
25 |
22 |
19 |
16 |
14 |
14 |
Whiteness % min |
74 |
74 |
74 |
74 |
74 |
74 |
70 |
70 |
Residual chlorethylenecontent mg/kg max |
5 |
5 |
5 |
5 |
5 |
5 |
5 |
5 |
Ethylidene chloride mg/kg max |
150 |
150 |
150 |
150 |
150 |
150 |
150 |
150 |
3.Package:
25kg/bag, PP valve bag with PE liner.
4.Application:
PVC resin - SG3 K-Value 72-71, Average degree of polymerization 1350-1250
PVC resin - SG4 K-Value 70-69, Average degree of polymerization 1250-1150
PVC resin - SG5 K-Value 68-66, Average degree of polymerization 1100-1000
PVC resin - SG6 K-Value 65-63, Average degree of polymerization 950-850
PVC resin - SG7 K-Value 62-60, Average degree of polymerization 850-750
PVC resin - SG8 K-Value 59-55, Average degree of polymerization 750-650
SG-1 is used in producing high-grade electrical insulating material
SG-2 is used in producing electrical insulating material, common soft products and film
SG-3 is used in producing electrical insulating materials, agricultural film, daily-use plastic products,
SG-4 is used in producing membranelle for industrial and civil use, tube and pipes
SG-5 is used in producing transparent products section bar, hard tube and decorative materials
SG-6 is used in producing clear foil, hard board and welding rod
SG-7, SG-8 is used in producing clear foil, hard injection molding.
5. FAQ
1)Q:Are you a factory or trading company?
A:We are a factory.
2)Q:Where is your factory located? How can I visit there?
A:Our factory is located in Zhengzhou, Henan Province, China
you can fly to Zhengzhou Xinzheng International Airport .
All our clients, from home or abroad, are warmly welcome to visit us!
3)Q:What is thepayment terms?
A: L/C ,T/T, D/P, D/A
4)Q:How can I get some samples?
A: Kindly send us your address, we are honored to offer you samples.
5)Q:How does your factory do regarding quality control?
A: Our factory can accept any third party inspecition.
Contact Person: Doris
September 25, 2024
September 25, 2024
Contactar proveedor
September 25, 2024
September 25, 2024
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
Fill in more information so that we can get in touch with you faster
Privacy statement: Your privacy is very important to Us. Our company promises not to disclose your personal information to any external company with out your explicit permission.
