Resin button manufacturing process

Resin buttons are a variety of buttons in the market, which are widely used by people. The price is relatively affordable and the quality is good.

Resin button making process

1. Raw material: Unsaturated polyester is a raw material extracted from petroleum, transparent and viscous liquid. Resins with catalysts and hardeners can be added with different colorants, or other raw materials, such as wax, salt, sawdust, straw, etc., with different amounts of raw materials, at different concentrations, different temperatures, different rotation speeds and special Under the cooperation of accessories, it will produce ever-changing patterns, and it is also an important material for imitation of natural reproduction pearls, horns, fruits, wood grain, stone, marble and other natural imitation buttons.

2. Plate: Pour the fully mixed resin into the rotating bucket, commonly known as the rewind bucket or large diameter, and pour on multiple layers as needed. After about 30 minutes, the resin in the bucket can be soft gelled due to chemical reaction. Cut into plate shape and place it on the punching machine to flush out the knob. A sheet of paper rushes out of about 24L of button embryos 47 inches.

3. Sticks: The completely mixed mortar, through a special swinger into the waxed aluminum tube, until the glue into a soft gel pull out the plastic stick in the aluminum tube immediately sliced, slicing knife can be cut every 1300 18L button knob embryo. Each stick can be cut into 24L button embryos.

4. Stick embryos: All embryos or stick embryos are soft and must be placed in 80-degree hot water for 10 hours to speed up the chemical reaction. After the reaction, the embryos become hard embryos.

5. Button: automatic car button machine, you can once over the car surface, car bottoms and holes, even if the lettering, carved flowers can be completed in one go. Ordinary four holes have a side and a button on the bottom of the car, which can engrave 100 grains per minute.

6. Grinding: As the surface of the car and the car left a mark, it needs to be put into the water mill barrel to make it smooth. The slow-rotating water mill bucket is mainly filled with water and lime powder. This process takes ten hours. After the water has been rubbed, the button has a dull mist effect. If the lighting effect needs to be brightened, the bamboo core and wax are mainly placed in the brightening bucket. This process takes 20 hours; or the small stones and stone powder are used in the water polishing machine. To achieve the above effect, this process takes 15 hours.

For more information on purchasing information updates, please follow: China Button Trading Network