How to install these faucet hoses

In our lives, we often use the faucet product, so we will not be unfamiliar with this product. However, due to long-term use, it will inevitably lead to leakage problems and need to be repaired. At this time, it will be very helpful to have relevant repair knowledge. Important, for example, how to install the faucet hose ? Here's to go with the Xiaobian to see it, I believe you can also become a home repair assistant.

How to install the faucet hose

1, close the inlet valve

Before the replacement, the inlet valve must first be closed. Generally speaking, this type of valve is located under the tabletop. If the valve is not tightly closed or cannot be closed, it is necessary to use the raw material along with the thread direction when installing the new tap. Around 7-8 laps, don't wrap around, otherwise it is easy to seep, and then prepare a bucket to collect water under the water pipe to prevent waste of water resources. In addition, when the valve cannot be closed, new faucets and other taps must be opened in order to divert the flow. .

2, disassemble the bathroom faucet

(1) Separate inlet pipe and hose

First, use related tools to separate the inlet pipe from the hose. Generally speaking, the inlet pipe in the bathroom is a bright pipe, and it can be shaken with both hands. When disassembling it, be careful to prevent it from being inadvertently broken. The operation is to hold the water pipe with the left hand and turn the wrench with the right hand so that the two can be easily separated.

(2) Separate faucet and basin

After the faucet is removed from the fixture, it is removed from the basin. However, it is believed that most users will find that due to the relatively large number of hoses used in the faucet, embrittlement has occurred and the fasteners are often there. It is already rusted and cannot be unscrewed with a wrench.

(3) sawing the interface with a saw

As we all know, the area under the basin is relatively narrow, so it is usually difficult to remove when it is disassembled, and the glass glue between the basin and the countertop is old and has long lost its adhesive effect, so the basin can be easily removed from the countertop. The construction will not appear impedimental, and then sawing off the hard-to-remove part of the rust, the faucet will be successfully dismantled.

3, install the bathroom faucet

(1) Assembling and fixing the faucet

At the time of installation, the preparation work must be done. First, put the pipe inside the faucet and connect it. Then connect the screw rod to the faucet joint, and use a rubber ring to put on the faucet and then extend the faucet into the basin. Pads and gaskets, and finally the screws with a wrench.

(2) replacement hose, plus plug

Due to the need of life, many faucets now have two types of hot and cold. The internal valve is three-way, and there is only one inlet. Only one hose can be connected at this time, but the other hose is also connected. At the same time, we must think of ways to block the other end, for example, using silk plugs.

Summary: Well, the above is about the installation of the faucet hose is introduced, I hope to provide you with some help, I believe that in the future faucet hose installation process, friends will be more handy, to create their own satisfactory results.