Laser drilling machine performance

The automatic processing of the tip of the punching machine for processing has the characteristics of low noise, easy operation, high output and stable performance. The forming time of the workpiece is short, the efficiency is high, the processing surface is smooth, and the workpiece is free from scratches. With a closed loop lubrication system to ensure long-term normal operation of the machine, this article will introduce you to the performance of laser drilling machine.

The document punching machine needs to meet the following requirements: when the punching machine has a specified thickness of 30mm, it still maintains a good punching quality; the punching tool is resistant to wear and has a long working life; the service life is long and the warranty period is low. Rework rate; high work efficiency and stable performance.

The base of the punching machine is provided as a support arm on the base of the base; the electromagnetic attraction mechanism realizes linear movement up and down, and is disposed on the support arm; the bracket is used for limiting nonlinear movement of the electromagnetic attraction mechanism, and is disposed on the electromagnetic attraction mechanism It is used to limit the nonlinear movement of the electromagnetic attraction mechanism; the cutter mechanism is fixed to the electromagnetic attraction mechanism, and the document is punched up and down with the electromagnetic attraction mechanism.

When the user presses the start button to start the document punch, the control circuit board is powered, and the control circuit board energizes the electromagnetic coil to generate a magnetic attraction to move the armature down the optical axis.

Shanghai small pipe punching machine quality put a single workpiece into the feeding host table → automatic clamping → automatic feeding to the set position → according to the established CNC program equidistant, unequal distance precision feeding → automatic pressing → press The established CNC program stamping → cyclic reciprocating N times to complete a workpiece processing requirements → blanking → repeat the next workpiece. .

Article source address: http://